The steps of a casting
Lost-wax casting reproduces in metal a piece first made in wax or resin. It always follows the same order.
- Treeing: the waxes are attached by their sprues to a central trunk, which will channel the metal.
- Investing: the tree is placed in a flask, which is filled with a refractory plaster.
- Burnout: in the kiln, the wax melts and drains away. The plaster keeps the exact cavity of each piece.
- Casting: the flask is placed in a vacuum chamber; the molten metal fills the cavity through gravity and suction.
- Devesting: once the metal has set, the plaster is removed and the pieces are cut from the tree.
The pieces come out as raw castings: clean-up and finishing are available on demand.
The metals we cast
The workshop’s conversion table covers seven alloys. Fineness is the share of precious metal in the alloy.
- 18K gold: 18 parts gold out of 24, or 750 thousandths.
- 14K gold: 14 parts gold out of 24, or about 585 thousandths.
- 10K gold: 10 parts gold out of 24, or about 417 thousandths.
- Platinum 950: 950 thousandths platinum.
- 925 silver, known as sterling silver, and non-tarnish 925 silver: 925 thousandths silver.
- Bronze and brass: copper alloys, with no precious metal.
For alloys and allergens, see the workshop policy.
Preparing your waxes
A well-prepared wax makes a good casting. The workshop’s requirements (condition of the wax, sprue, length of the sprue path) are set out in the technical specifications, and the drop-off deadline under receiving orders.
Frequently asked questions
- Can a 3D-printed piece be cast?
- Yes. A piece printed in castable resin is cast like a wax: it burns out in the kiln and leaves its cavity in the plaster. The production times cover this case. See also 3D printing.
- How do I estimate the metal weight of a piece?
- Multiply the weight of the wax by the factor of the alloy. The conversion table does the calculation for each metal.
- Is platinum cast like gold?
- The principle is the same, but platinum melts at a much higher temperature than gold and silver. The workshop sets aside one casting day for it, given in the production times.