Skip to content

Jewelry casting glossary

The words of the workshop, explained in a sentence or two.

Alloy
A mixture of metals. Pure gold is too soft for jewelry: it is alloyed with other metals, which give it its hardness and its color.
Castable resin
A 3D printing resin formulated to burn out in the kiln like a wax. See 3D printing.
Casting tree
The waxes assembled on a central trunk before investing. See casting.
Clean-up
Dressing the raw casting: removing the sprue, smoothing the surfaces. See clean-up.
Filings
Fine particles of metal produced by filing and sawing. They are collected and refined.
Fineness
The proportion of precious metal in an alloy, expressed in karats for gold or in thousandths.
Flask
The metal tube in which the plaster is poured around the wax tree.
Hallmark
A mark stamped in the metal, which indicates its fineness among other things (750, 585, 925…). See recognizing fineness.
Investing
Filling the flask with a refractory plaster, around the wax tree.
Karat
The measure of gold fineness, out of 24: 24K gold is pure, 18K gold contains 18 parts gold out of 24. Not to be confused with the carat of gemstones, which is a unit of weight.
Laser welding
A very localized weld, made with a laser beam. See laser welding.
Lost wax
A casting process in which the wax pattern is destroyed by heat: it leaves a cavity in the plaster, which is then filled with metal. See casting.
Mold
A flexible impression of a master, in silicone or rubber, into which wax is injected to reproduce the piece. See mold making.
Pre-polishing
An intermediate polish, done before stone setting. See pre-polishing.
Prong
A metal claw folded over the stone to hold it. See stone setting.
Redesign
Creating a new piece of jewelry from an old one: the stones are reset, the old gold is taken back. See jewelry redesign.
Refining
Separating the pure precious metal from the other metals in an alloy or a lot of scrap. See gold buying for professionals.
Scrap gold
Recovered gold: old, broken or outdated jewelry, meant to be melted down. See gold buying.
Setting (head)
The part of the piece that receives the stone.
Sprue
The rod that connects the piece to the tree and through which the metal enters the cavity. It is cut off after casting.
Sterling silver
An alloy containing 925 thousandths silver, often stamped 925.
STL
A 3D file format that describes the surface of an object as a mesh of triangles; it is the most common for 3D printing.
Stone setting
The way the metal holds the stone: prong, bezel, bead, channel. See stone setting.
Thousandth
The unit of fineness: 750 thousandths means 75% precious metal.